Engineering grain boundary anisotropy to elucidate grain growth behavior in alumina

Current grain growth models have evolved to account for the relationship between grain boundary energy/mobility anisotropy and the five degrees of grain boundary character. However, the role of grain boundary networks on overall growth kinetics remains poorly understood. To experimentally investigate this problem, a highly textured Al₂O₃ was fabricated by colloidal casting in a strong magnetic field to engineer a unique spatial distribution of grain boundary character. Microstructural evolution was quantified and compared to an untextured sample. From this comparison, a prevalence of (0001)/(0001) terminated grain boundaries with anisotropic networks were identified in the textured sample. These boundaries and their networks were found to be driving grain growth at a faster rate than predicted by models. These findings will allow better modelling of grain growth in real systems by experimentally exploring the impact thereon of grain boundary plane anisotropy and relative energy/mobility differences between neighboring boundaries.     

Ultra-Robust Flexible Electronics by Laser-Driven Polymer-Nanomaterials Integration

Polyethylene terephthalate (PET) is the most widely used polymer in the world. For the first time, the laser-driven integration of aluminum nanoparticles (Al NPs) into PET to realize a laser-induced graphene/Al NPs/polymer composite, which demonstrates excellent toughness and high electrical conductivity with the formation of aluminum carbide into the polymer is shown. The conductive structures show an impressive mechanical resistance against >10000 bending cycles, projectile impact, hammering, abrasion, and structural and chemical stability when in contact with different solvents (ethanol, water, and aqueous electrolytes). Devices including thermal heaters, carbon electrodes for energy storage, electrochemical and bending sensors show this technology's practical application for ultra-robust polymer electronics. This laser-based technology can be extended to integrating other nanomaterials and create hybrid graphene-based structures with excellent properties in a wide range of flexible electronics’ applications.     

基于GIS单线图的配网停电单模拟操作应用研究

配电网停电会造成电力系统供配电可靠性以及服务质量下降,研究基于地理信息系统(GIS)单线图的配网停电单模拟操作应用。利用网格长度作为基本单位建立坐标系,以选取起始点与终止点为基础,通过四参数法将GIS坐标映射至图纸网格内,实现配网内设备初步布局,将杆塔、站房和整体均匀分布作为优化目标,设置多目标优化目标函数实现GIS单线图最终优化。选取某电力公司配网作为单模拟操作应用对象,模拟结果表明,单模拟操作配网停电后,该配网各负荷点年故障率、次平均停电时间以及年停电时间均有所减少,可有效提升配网的供配电可靠性。     

基于Prophet人工智能算法的网络潮汐效应预测研究

本文使用Prophet人工智能算法研究与预测移动通信网络“潮汐效应”现象，探索网络“潮汐效应”在优化网络资源配置实现网络降本增效的作用。Prophet人工智能算法是一种简单、有效，且易于实现的人工智能算法。通过facebook的人工智能开源框架fbprophet，研究4G网络PRB利用率等网络资源指标的“潮汐效应”，并预测这些网络资源指标在未来的变化趋势，用来指导当前4G网络减容、扩容和4/5G节电节能等，实现优化网络资源配置达到降本增效的目的。     

Warpage control method during surface forming process of plastic film-reinforced flexible decorative veneer

The plastic film of the new plastic film reinforced pliable decorative veneer (PRPDSV) is used as a flexible reinforcement material and an adhesive material. It has good water resistance, impermeability, simple preparation and finishing processes, and no formaldehyde release. However, warpage phenomenon during hot pressing has been a bottleneck problem restricting its industrial development. In order to solve this problem solve, the study proposed a concave, and convex molds method, established an elastic–plastic FEA model of hot pressing processes of the PRPDSV using concave and convex molds with static/general static solution module in the nonlinear ABAQUS, and researched the effect on the performances of the PRPDSV from the parameters of temperature, pressure, and mold curvature radius theoretically and verified experimentally. Analysis results showed that the surface forming temperature had a great effect on warpage control for PRPDSV. The higher the temperature is, the smaller the curvature radius of the corresponding mold will be and the better the warpage will be. The curvature radius of the molds had a significant effect on the warpage control. Under the conditions with the same hot pressing parameters, the smaller the curvature radius is, and the better control on the warpage for the PRPDSV will be.     

Ferroelectric domain structure and atomic-scale phase distribution in a Pb(Mg1/3Nb2/3)O3-PbTiO3 single crystal

Lead-based relaxor ferroelectric crystals, such as Pb(Mg_1/3Nb_2/3)O₃-PbTiO₃, are promising for functional applications due to their outstanding ferroelectric properties. Revealing ferroelectric domain structure and phase distribution at the nanoscale are important to understand the basic theory of ferroelectricity and promote their practical applications. In this study, the ferroelectric domain structure and atomic-scale phase distribution in a Pb(Mg_1/3Nb_2/3)O₃ - 35 at.% PbTiO₃ single crystal in the region of morphotropic phase boundary are systematically investigated by a combination of optical microscopy, scanning electron microscopy, and aberration-corrected transmission electron microscopy. It is found that 90° and 180° coarse domains are formed simultaneously in the ferroelectric single crystal. Moreover, there are tweed-like nano-domains formed inside each coarse single domain. Through careful investigations of distribution of stress and tetragonality, it is revealed that the tweed-like nano-domains are composed of nano-sized rhombohedral (R), monoclinic (M), and tetragonal (T) phases. The nano-scale T, M, R phases have the best, moderate, and lowest ferroelectricity, respectively.     

Structural,electrical, and linear/nonlinear optical characteristics of thermally evaporated molybdenum oxide thin films

Homogeneous thin films of Molybdenum oxide (MoO₃) were grown on quartz and glass substrates using the thermal evaporation method. XRD results showed that the MoO₃ powder has a polycrystalline structure with an orthorhombic crystal system whereas the MoO₃ thin films have amorphous nature. SEM images showed that the MoO₃ thin films have a nearly uniform surfaces with worm-like shape grains. The film thickness influences on the linear and nonlinear optical characteristics of MoO₃ thin films that were examined using spectrophotometric measurements and from which, the linear optical constants of the MoO₃ thin films were estimated. The electronic transition type was determined as a direct allowed one. The values of the optical band gap were obtained to be in the range of 3.88–3.72 eV. The dispersion parameters, third-order nonlinear optical susceptibility, and the nonlinear refractive index of the MoO₃ thin films were determined and interpreted in the light of the single oscillator model. The temperature dependence of the DC electrical conductivity and the corresponding conduction mechanism for the MoO₃ films were investigated at temperatures ranging from 303 to 463 K.     

Influence of thermal runaway in styrene–acrylonitrile bulk copolymerization revealed by computational fluid dynamics modeling

The computational fluid dynamics (CFD) and kinetic-based moment methods coupled approach is adopted to simulate the bulk copolymerization of styrene–acrylonitrile (SAN) in a stirred tank reactor. Numerical simulations are carried out to investigate the impacts of impeller speed, monomer ratio, initiator ratio, and initial reaction temperature on the copolymerization process and product properties. Particularly, the Chaos theory is selected as a criterion for evaluating the occurrence of the thermal runaway. The Flory's and Stockmayer's distributions are employed to calculate chain length distribution and copolymer composition distribution of copolymer. The simulation results highlight that the appearance of thermal runaway can be postponed by properly increasing the rotation speed, decreasing the initiator loadings, initial acrylonitrile contents and initial reactor temperature. Furthermore, significant differences exist in the product properties that predicted by the ideal and non-ideal models, which demonstrates that the temperature heterogeneity plays a crucial role in SAN copolymerization. This study could offer references for the safe operation and design of polymerization processes.     

An adjusted K‐medoids clustering algorithm for effective stability in vehicular ad hoc networks

Recently, the routing problem in vehicular ad hoc networks is one of the most vital research. Despite the variety of the proposed approaches and the development of communications technologies, the routing problem in VANET suffers from the high speed of vehicles and the repetitive failures in communications. In this paper, we adjusted the well‐known K‐medoids clustering algorithm to improve the network stability and to increase the lifetime of all established links. First, the number of clusters and the initial cluster heads will not be selected randomly as usual, but based on mathematical formula considering the environment size and the available transmission ranges. Then the assignment of nodes to clusters in both k‐medoids phases will be carried out according to several metrics including direction, relative speed, and proximity. To the best of our knowledge, our proposed model is the first that introduces the new metric named “node disconnection frequency.” This metric prevents nodes with volatile and suspicious behavior to be elected as a new CH. This screening ensures that the new CH retains its property as long as possible and thus increases the network stability. Empirical results confirm that in addition to the convergence speed that characterizes our adjusted K‐medoids clustering algorithm (AKCA), the proposed model achieves more stability and robustness when compared with most recent approaches designed for the same objective.